Specifier Review
The Ins and Outs of a Revolving Door

The Ins and Outs of a Revolving Door

The chances are as a pedestrian and a building user, you’ve been through a few revolving doors in your lifetime. The revolving door is a common sight amongst larger commercial buildings and in many places where there is a high foot fall.

The revolving door, usually consists of three or four doors known as wings which are spaced at an eqi-distance from each other around a central shaft. These wings rotate in a circle inside of a cylinder. The size of the cylinder can vary from small, allowing for just enough space for a single user to a larger size which allows enough room for several people, pushchairs or luggage to fit in.

It is a well-established fact that the revolving door holds many advantages over the more traditional hinged door. Not only are revolving doors more energy efficient than regular doors but they help to keep the cost of heating and cooling to a minimum. When the users of manual doors open a regular door a large amount of air can escape the building. The installation of a revolving door can help to eliminate this and the amount of air that escapes whilst the door wings of a revolving door circulates is minimal. In this way, drafts are reduced and your lobby area is kept at a comfortable temperature.

Another key feature of the revolving door is that they allow more people to enter and exit buildings at a quicker rate. A high frequency mobility hotspot can benefit greatly through the installation of a revolving door as it allows for people to enter and exit a building at the same time without any collisions. A more traditional door results in one person to wait whilst another passes through.

Architects often opt for a revolving door to assist with the soundproofing of a lobby area. When in use, a revolving door will help keep out unwanted street noise and will eliminate the sound of slamming doors. They are also the preferred method of entry solution especially within a more confined space as a revolving door will often make a building seem much larger and more majestic in appearance.

About Royal Boon Edam

With work environments becoming increasingly global and dynamic, the entry has become the centre of activity in many buildings. As the importance of the entry as a mobility hotspot increases, the demands we put on managing the passage of people through them grow. Royal Boon Edam is a global market leader in entry solutions. Headquartered in the Netherlands, with 140 years of experience in engineering quality, we have gained extensive expertise in managing the movement of people through office buildings, airports, healthcare facilities, hotels and many other types of buildings. We are focussed on providing an optimal experience for our clients and their clients. By working together with you, our client, we help determine the exact requirements for the mobility hotspot in and around your building and develop a solution that is customised for you in three key areas: sustainability, security and service. You can find more news about Boon Edam on www.boonedam.co.uk/newsroom.